{"id":6920,"date":"2026-11-05T12:38:30","date_gmt":"2026-11-05T12:38:30","guid":{"rendered":"https://www.flexiteek.com/nl-nl/?page_id=6920"},"modified":"2026-11-05T12:38:32","modified_gmt":"2026-11-05T12:38:32","slug":"isiteek-installation-manual","status":"publish","type":"page","link":"https://www.flexiteek.com/nl-nl/isiteek-installation-manual/","title":{"rendered":"ISITEEK INSTALLATION MANUAL"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\"><strong>Thank you for choosing Isiteek!</strong></p>\n\n\n\n<p class=\"wp-block-paragraph\">We’ve created Isiteek to be a simple and straightforward decking system that you can put together yourself.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">Tools you will require to get started:</p>\n\n\n<div class=\"wp-block-wrapper wp-block-wrapper-core/list\">\n<ul class=\"wp-block-list\">\n<li>A workbench with a straight edge to work against</li>\n\n\n\n<li>Some weights</li>\n\n\n\n<li>Masking tape</li>\n\n\n\n<li>Sharp knife</li>\n\n\n\n<li>Metal ruler</li>\n</ul>\n</div>\n\n<div class=\"wp-block-wrapper wp-block-wrapper-core/list\">\n<ul class=\"wp-block-list\">\n<li>Glue for joining the planks</li>\n\n\n\n<li>Caulking gun</li>\n\n\n\n<li>Flat levelling trowel</li>\n\n\n\n<li>Roller</li>\n\n\n\n<li>Pair of compasses</li>\n\n\n\n<li>Adhesive for gluing the panel to the deck</li>\n</ul>\n</div>\n\n\n<p class=\"wp-block-paragraph\">UNPACKING</p>\n\n\n\n<p class=\"wp-block-paragraph\">Congratulations on choosing Isiteek for your boat! Before unpacking, ensure your work environment is above 20 degrees Celsius for optimal handling. Reroll the Isiteek with the top surface facing outwards.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Then let the material sit in a warm room for 24 hours before attempting any further steps. This is to expedite the removal of any structural &#8220;memory&#8221; from the material.</p>\n\n\n\n<p class=\"wp-block-paragraph\">In 2025, Isiteek introduced an updated colour range as part of its ongoing product development. While previous-generation Isiteek remains fully suitable for use, it is not compatible with the new colour range and should not be mixed within the same installation.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">TEMPLATING</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Design and Planning</strong></p>\n\n\n\n<p class=\"wp-block-paragraph\">Before templating your deck, determine the desired location and style you would like. This can affect the templating process or the materials needed.</p>\n\n\n\n<p class=\"wp-block-paragraph\">For a deck based on the boat&#8217;s centre line, like a swim platform or cockpit sole, fold the template in half to find the centre line and build the panel from there. Avoid having slivers of plank or caulking on the outer edges. If using margin boards, mark the template accordingly for a neat panel (see adding a margin).</p>\n\n\n\n<p class=\"wp-block-paragraph\">For a deck with no centerline, for example as cockpit seats, work from the inside edge out. Start with a full plank on the inside edge, using a margin board if needed. Adjust the width of the first plank if necessary to avoid slivers on the back edge.</p>\n\n\n\n<p class=\"wp-block-paragraph\">If building a deck leading from one area to another, like sports power boats, create reference lines on the template between areas. Build the swim platform first from the centre line, align it with the cockpit template, and mark caulking lines. Then, proceed to build the cockpit floor, ensuring alignment with the boat&#8217;s centre line.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Check out our photo galleries at <a href=\"http://www.flexiteek.com/nl-nl\" target=\"_blank\" rel=\"noopener\">www.flexiteek.com/nl-nl</a> for layout ideas. If in doubt, contact your nearest Isiteek/Flexiteek distributor for advice and assistance.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Start Templating</strong></p>\n\n\n\n<p class=\"wp-block-paragraph\">Creating an accurate template is crucial for your deck installation. Follow these concise steps:</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 1:</strong> Clean the boat surface: Ensure the surface is clean and dry. Unroll your templating material and let it settle flat.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 2:</strong> Secure your templating material: Fully cover the area with the templating material, taping multiple pieces together if needed. Use tape along the perimeter to secure the material flat for accurate tracing.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 3:</strong> Trace the Perimeter: Use a pen or pencil to trace the shape of the surface area. Especially focusing on where the edge of the deck will be visible after installation.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 4:</strong> Mark hatches and hardware: Outline any hatch edges and hardware details using a pen. Ensure that hinges, pulls, cleats, pedestals, stanchions and any features that may affect the templating of your deck are accurately traced.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 5:</strong> Add notes and match lines: Make notes on the template, indicating Fore, Aft, the centre line, and where any potential margins would be placed. Add match lines if you have adjacent templated areas to ensure caulking lines match.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 6:</strong> Cut and dry fit: Remove the tape and cut the templating material according to the outlines. Lay the template on top of the area to confirm the fit &#8211; make adjustments if necessary. The template should now precisely match the desired deck coverage.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Final Checks:</strong> Double-check and make corrections as needed. Ensure notes are clear and cladding lines and adjacent pieces align.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">PREPARING YOUR ISITEEK MATERIAL</p>\n\n\n\n<p class=\"wp-block-paragraph\">Heat the Isiteek to ensure the material lies flat. This step not only enhances workability but also facilitates a smoother and more manageable installation process. By applying heat, you create optimal conditions for working with the Isiteek material, improving overall ease and efficiency in your project.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">JOINING THE PLANKS</p>\n\n\n\n<p class=\"wp-block-paragraph\">It is time to build your deck!</p>\n\n\n\n<p class=\"wp-block-paragraph\">Cut your planks to extend over the template from 5mm from each edge of the outline, to ensure that you have plenty of material for the following steps. Make sure that the planks are cut according to the direction you want them to run when installed. Work on a hard flat surface.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 1:</strong> Build on top of your template <strong>&#8211;</strong> Begin designing your deck by building the panels on top of your template. Place the first plank against a straight edge and apply weight on top.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 2:</strong> Adhesive application <strong>&#8211;</strong> Add adhesive to the edge of your first plank. Firstly, cut the glue nozzle at an 8mm angle, if required. Then gently squeeze the tube to apply an even and continuous bead of glue along the product&#8217;s edge.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 3:</strong> Joining planks <strong>&#8211;</strong> Put a new plank against the first one, ensuring that the planks are well aligned. Promptly, apply constant pressure by using some masking tape to hold the planks together and some weights to flatten the panel.</p>\n\n\n\n<p class=\"wp-block-paragraph\">As you add more planks, use a straight edge to check the planks are still straight, and that there isn&#8217;t a bend in the planks. A bend can be caused by there being too much pressure in one area.</p>\n\n\n\n<p class=\"wp-block-paragraph\">With the right volume of glue used, you will have a small amount coming up between the planks. Let the glue dry for approximately 15 minutes, and then use a small sharp knife to remove the excess glue. Use 40-60 grit sandpaper to remove the remaining glue residue.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Always sand along the caulk lines, so the sanding follows the direction of the graining of the Isiteek.</p>\n\n\n\n<p class=\"wp-block-paragraph\">If you are working at a temperature of approximately 20°C or above, you can move your panel after 15-20 minutes. If you are working at colder temperatures, wait at least an hour before moving your panel.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">CUTTING</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">Once you have joined your planks to the size you require and they have dried, it is time to cut your deck.</p>\n\n\n<div class=\"wp-block-wrapper wp-block-wrapper-core/list\">\n<ul class=\"wp-block-list\">\n<li>Move the template from underneath to on top of your assembled deck.</li>\n</ul>\n</div>\n\n<div class=\"wp-block-wrapper wp-block-wrapper-core/list\">\n<ul class=\"wp-block-list\">\n<li>Use weights to ensure the template lays flat and doesn’t move.</li>\n</ul>\n</div>\n\n<div class=\"wp-block-wrapper wp-block-wrapper-core/list\">\n<ul class=\"wp-block-list\">\n<li>Use a pencil or pen, to mark out around your template onto the Isiteek.</li>\n</ul>\n</div>\n\n<div class=\"wp-block-wrapper wp-block-wrapper-core/list\">\n<ul class=\"wp-block-list\">\n<li>Trim your plank length to slightly larger than your template.</li>\n</ul>\n</div>\n\n\n<p class=\"wp-block-paragraph\">When building multiple panels where the caulking seams need to line up, these panels need to be made in one piece where possible and then cut to the size of the template after.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">ADDING A MARGIN</p>\n\n\n\n<p class=\"wp-block-paragraph\">Looking to add a margin?</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 1:</strong> Firstly, mark your panel 60mm from the template edge &#8211; use a compass or an off-cut (Picture 1 &amp; 2).</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 2:</strong> Using a sharp knife cut your Isiteek panel slightly over the length of each edge (Picture 3).</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 3:</strong> Sand the edge of your cut panel to ensure it is even.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 4:</strong><strong></strong> Cut the margin boards to the correct length for each edge. Ensure that they fit nicely without any gaps or</p>\n\n\n\n<p class=\"wp-block-paragraph\">unevenness (Pictures 4, 5 and 6).</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 5:</strong> Put masking tape on the edge you are gluing the plank to.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 6:</strong> Apply glue to straight edged margin pieces and join to the edge of the Isiteek panel. Maintain even pressure until</p>\n\n\n\n<p class=\"wp-block-paragraph\">they have dried. Ensure that the margin boards do not connect to each other yet.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 7:</strong> Remove the masking tape.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 8:</strong> Once dry remove any excess glue, with a knife or 60-grit sandpaper.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 9:</strong> Draw a straight line extended from the midpoint of the corner/bend across to the opposite edge of the margin board.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 10:</strong> Lay one of the unglued planks against an unoccupied panel edge, it should overlap on top of a glued margin board, angled against the line drawn in step 7. Draw the desired bend outline on the margin board by extending the natural curve of the panel.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 11:</strong> Cut around your outline, slightly over the line to ensure it remains the same size when sanding the edge.</p>\n\n\n\n<p class=\"wp-block-paragraph\">These margins, when cut to size, will be glued in place during installation.</p>\n\n\n\n<p class=\"wp-block-paragraph\">For margin boards where the average margin won’t bend round, use the 125mm plank.</p>\n\n\n<div class=\"wp-block-wrapper wp-block-wrapper-core/list\">\n<ul class=\"wp-block-list\">\n<li>Put the panel on top of the 125mm plank, and mark the curve of the Isiteek panel onto the large plank.</li>\n\n\n\n<li>Then, use the drawing compass or piece of margin board and mark 60mm from the Isiteek panel edge to outline the full panel size.</li>\n\n\n\n<li>Alternatively, place your template back on top and mark the outside edge.</li>\n\n\n\n<li>Trim the king plank to the shape of the bend and the perimeter line and sand to ensure a good fit.</li>\n\n\n\n<li>On the external edge of the margin board, cut slightly over this line.</li>\n</ul>\n</div>\n\n\n<p class=\"wp-block-paragraph\">Regardless of how the margins are created, cut off 5mm from the inner line of the margin so you can easily fill it up with caulk-type adhesive, see pictures 7 and 8. Remove any excess glue with a sharp knife. Sand the panel, for an even finish.</p>\n\n\n\n<p class=\"wp-block-paragraph\">The next step is the installation.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Picture 1</strong></p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">INSTALLATION WITHOUT MARGINS</p>\n\n\n\n<p class=\"wp-block-paragraph\">Once you have completed all the pieces for your new deck it is time to start the installation.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 1:</strong> First ensure your working temperature is above 18℃. If the temperature isn&#8217;t above 18, it could cause problems in the future such as bubbles. This is due to the tensions in the material.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 2:</strong> Clean the surface(s) you will be installing your Isiteek deck onto. The surface must be free of dirt. The recommended way to do this is to pour some ethanol onto a cloth and wipe the installation area. Also, wipe the back of the Isiteek to ensure no dirt is present. Ensure both areas are dry before beginning.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>IMPORTANT TIP:</strong> <strong>Do not use Acetone.</strong></p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 3:</strong> Once washed, lay the Isiteek panel in place to check it fits.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 4:</strong> Mark the edges with a pencil and place masking tape around the edges. This is to avoid excess adhesive being squeezed out onto the boat deck when using the roller.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 5:</strong> Squeeze the adhesive directly onto the surface of the deck.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 6:</strong> Use a levelling trowel to spread the adhesive evenly. Hold the trowel against the surface at a 90° angle for best results.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 7:</strong> If the panel is large, adhesive half the panel at a time.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 8:</strong> Place the Isiteek on top of the glued area and &#8220;roll out&#8221; all the air. Ensure the panel is completely flat with no bumps or trapped air.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 9:</strong> Add weights to all corners and allow the adhesive to harden for 24 hours.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">INSTALLATION WITH MARGINS</p>\n\n\n\n<p class=\"wp-block-paragraph\">Once you have completed all the pieces for your new deck it is time to start the installation.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 1:</strong> First ensure your working temperature is above 18℃. If the temperature isn&#8217;t above 18, it could cause problems in the future such as bubbles. This is due to the tensions in the material.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 2:</strong> Clean the surface(s) you will be installing your Isiteek deck onto. The surface must be free of dirt. The recommended way to do this is to pour some ethanol on to a cloth and wipe the installation area. Also, wipe the back of the Isiteek to ensure no dirt is present. Ensure both areas are dry before beginning.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Do not use Acetone.</strong></p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 3:</strong> Once washed, lay the Isiteek panel in place to check it fits.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 4:</strong> Mark the edges with a pencil and place masking tape around the edges. This is to avoid excess adhesive being squeezed out onto the boat deck when using the roller.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 5:</strong> Apply the adhesive directly onto the surface of the deck.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 6:</strong> Use a levelling trowel to spread the adhesive evenly. Hold the trowel against the surface at a 90° angle for best results.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 7:</strong> If the panel is large, apply adhesive to half the panel at a time.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 8:</strong> Add the pre-cut margin boards that are not already attached to the panel and press/roll them down with a 5mm gap</p>\n\n\n\n<p class=\"wp-block-paragraph\">to the panel, using spacers if necessary (Picture 9).</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 9:</strong> When rolled down place weights at all corners and on margin boards and allow the adhesive to harden for 24 hours.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 10:</strong> Mask both sides of your 5 mm openings left at mitres and margin boards. Carefully trim using a ruler or a straightedge and a knife (Picture 10).</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 11:</strong> Fill the seam with caulking compound (See picture 11) smooth it level with the masking tape using an old chisel, knife, end of steel ruler, wet finger etc. Be careful not to spread the caulking onto the panel. Work quickly as the caulking skins over in 15 to 20 minutes.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 12:</strong> Remove the masking tape and leave your panel for several hours or overnight to cure.</p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Step 13:</strong> Clean up any excess or unevenness in the caulking using sandpaper. Once the caulking has fully cured, ensure you sand in the direction of the grain (see picture 12).</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">CONTACT US</p>\n\n\n\n<p class=\"wp-block-paragraph\">ISITEEK INSTALLATION MANUAL 2025</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">INSTALLATION TIPS</p>\n\n\n\n<p class=\"wp-block-paragraph\">We’ve put these easy-to-follow additional tips together to ensure you get the most from your new Isiteek deck.</p>\n\n\n\n<p class=\"wp-block-paragraph\">PREPARATION OF MATERIALS</p>\n\n\n\n<p class=\"wp-block-paragraph\">Heat the Isiteek to just over 50-60° C, this can be done by using an oven or a similar device.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Do not use a hot air gun or a hair dryer since that could heat up the material too much locally. Let the material be warm through the complete material, this could take 3-5 hours.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Cut the pieces you need to the right length plus a few centimetres. Let the cut lengths lay flat and straight when cooling down, this will make the material easier to work with.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">CONSTRUCTION</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">See the description attached in the Isiteek package.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">INSTALLATION</p>\n\n\n\n<p class=\"wp-block-paragraph\">Isiteek should not be installed at temperatures below 18°C, since tensions in the material may cause future problems such as bubbles.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Clean the surface(s) where the Isiteek is to be installed, the surface must be free of dirt and also washed with ethanol or similar.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Pour some ethanol on a cloth and wash. Also, wash the back of the Isiteek just before installation, using the same method for cleaning the deck.</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">ATTENTION! DO NOT USE ACETONE</p>\n\n\n\n<p class=\"wp-block-paragraph\"></p>\n\n\n\n<p class=\"wp-block-paragraph\">After washing, lay the Isiteek panel in place, mark the edges with a pencil and mask (with tape) around the edges. This will avoid the excess glue/adhesive to be squeezed out on the deck when using the roller. The roller is used to have the excess of glue/adhesive and trapped air “rolled out” from beneath the Isiteek.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Squeeze the glue onto the surface, then use the red notched trowel to spread the glue. Hold the spatula pressed against the substrate at a 90° angle to get the right amount of glue. Put the Isiteek panel on and roll the panel down in the glue, “roll out” all the air and make sure the panel is completely flat, without bumps and trapped air beneath.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Add the pre-cut margin boards that are not already glued to the panel and press/roll them down with a 5mm gap to the panel. When the panel is properly rolled down, you should place weights at all corners and on the margin boards. Allow the glue to harden for at least 24 hours before the next step.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Mask both sides of the 5mm wide openings left at mitres and margin boards. Fill with glue/adhesive, the same as used when installing, wet your finger in a solution of clean washing-up liquid and water to smooth the joint. Remove the mask (tape) immediately after.</p>\n\n\n\n<p class=\"wp-block-paragraph\">Let the glue harden for at least 24 hours, then sand off the excess and smooth the joint with 60-grit sandpaper.</p>\n","protected":false},"excerpt":{"rendered":"<p>Thank you for choosing Isiteek! We’ve created Isiteek to be a simple and straightforward decking system that you can put together yourself. Tools you will require to get started: UNPACKING Congratulations on choosing Isiteek for your boat! Before unpacking, ensure your work environment is above 20 degrees Celsius for optimal handling. Reroll the Isiteek with [&hellip;]</p>\n","protected":false},"author":3,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"audience-types":[],"class_list":["post-6920","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.7 - https://yoast.com/product/yoast-seo-wordpress/ -->\n<title>ISITEEK INSTALLATION MANUAL - Flexiteek International (EN-GB)</title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" />\n<link rel=\"canonical\" href=\"https://www.flexiteek.com/nl-nl/isiteek-installation-manual/\" />\n<meta property=\"og:locale\" content=\"nl_NL\" />\n<meta property=\"og:type\" content=\"article\" />\n<meta property=\"og:title\" content=\"ISITEEK INSTALLATION MANUAL - Flexiteek International (EN-GB)\" />\n<meta property=\"og:description\" content=\"Thank you for choosing Isiteek! We’ve created Isiteek to be a simple and straightforward decking system that you can put together yourself. Tools you will require to get started: UNPACKING Congratulations on choosing Isiteek for your boat! Before unpacking, ensure your work environment is above 20 degrees Celsius for optimal handling. Reroll the Isiteek with [&hellip;]\" />\n<meta property=\"og:url\" content=\"https://www.flexiteek.com/nl-nl/isiteek-installation-manual/\" />\n<meta property=\"og:site_name\" content=\"Flexiteek International (EN-GB)\" />\n<meta property=\"article:publisher\" content=\"https://www.facebook.com/Flexiteek\" />\n<meta property=\"article:modified_time\" content=\"2026-11-05T12:38:32+00:00\" />\n<meta name=\"twitter:card\" content=\"summary_large_image\" />\n<meta name=\"twitter:label1\" content=\"Est. reading time\" />\n\t<meta name=\"twitter:data1\" content=\"12 minutes\" />\n<script type=\"application/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\/\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/isiteek-installation-manual\\/\",\"url\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/isiteek-installation-manual\\/\",\"name\":\"ISITEEK INSTALLATION MANUAL - Flexiteek International (EN-GB)\",\"isPartOf\":{\"@id\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/#website\"},\"datePublished\":\"2026-11-05T12:38:30+00:00\",\"dateModified\":\"2026-11-05T12:38:32+00:00\",\"breadcrumb\":{\"@id\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/isiteek-installation-manual\\/#breadcrumb\"},\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\/\\/www.flexiteek.com\\/en-gb\\/isiteek-installation-manual\\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/isiteek-installation-manual\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"ISITEEK INSTALLATION MANUAL\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/#website\",\"url\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/\",\"name\":\"Flexiteek International\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"nl-NL\"},{\"@type\":\"Organization\",\"@id\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/#organization\",\"name\":\"Flexiteek International AB\",\"url\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/#\\/schema\\/logo\\/image\\/\",\"url\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/wp-content\\/uploads\\/sites\\/2\\/2025\\/09\\/flexiteek-landscape-logo.svg\",\"contentUrl\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/wp-content\\/uploads\\/sites\\/2\\/2025\\/09\\/flexiteek-landscape-logo.svg\",\"width\":610,\"height\":133,\"caption\":\"Flexiteek International AB\"},\"image\":{\"@id\":\"https:\\/\\/www.flexiteek.com\\/en-gb\\/#\\/schema\\/logo\\/image\\/\"},\"sameAs\":[\"https:\\/\\/www.facebook.com\\/Flexiteek\",\"https:\\/\\/www.instagram.com\\/flexiteek\\/\",\"https:\\/\\/www.linkedin.com\\/company\\/flexiteek-international-ab\\/\",\"https:\\/\\/www.youtube.com\\/c\\/Flexiteek\"]}]}</script>\n<!-- / Yoast SEO plugin. -->","yoast_head_json":{"title":"ISITEEK INSTALLATIEHANDLEIDING - Flexiteek International (EN-GB)","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https://www.flexiteek.com/nl-nl/isiteek-installation-manual/","og_locale":"nl_NL","og_type":"article","og_title":"ISITEEK INSTALLATION MANUAL - Flexiteek International (EN-GB)","og_description":"Thank you for choosing Isiteek! We’ve created Isiteek to be a simple and straightforward decking system that you can put together yourself. Tools you will require to get started: UNPACKING Congratulations on choosing Isiteek for your boat! Before unpacking, ensure your work environment is above 20 degrees Celsius for optimal handling. Reroll the Isiteek with [&hellip;]","og_url":"https://www.flexiteek.com/nl-nl/isiteek-installation-manual/","og_site_name":"Flexiteek International (EN-GB)","article_publisher":"https://www.facebook.com/Flexiteek","article_modified_time":"2026-11-05T12:38:32+00:00","twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"12 minutes"},"schema":{"@context":"https://schema.org","@graph":[{"@type":"WebPage","@id":"https://www.flexiteek.com/nl-nl/isiteek-installation-manual/","url":"https://www.flexiteek.com/nl-nl/isiteek-installation-manual/","name":"ISITEEK INSTALLATION MANUAL - Flexiteek International (EN-GB)","isPartOf":{"@id":"https://www.flexiteek.com/nl-nl/#website"},"datePublished":"2026-11-05T12:38:30+00:00","dateModified":"2026-11-05T12:38:32+00:00","breadcrumb":{"@id":"https://www.flexiteek.com/nl-nl/isiteek-installation-manual/#breadcrumb"},"inLanguage":"nl-NL","potentialAction":[{"@type":"ReadAction","target":["https://www.flexiteek.com/nl-nl/isiteek-installation-manual/"]}]},{"@type":"BreadcrumbList","@id":"https://www.flexiteek.com/nl-nl/isiteek-installation-manual/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https://www.flexiteek.com/nl-nl/"},{"@type":"ListItem","position":2,"name":"ISITEEK INSTALLATION MANUAL"}]},{"@type":"WebSite","@id":"https://www.flexiteek.com/nl-nl/#website","url":"https://www.flexiteek.com/nl-nl/","name":"Flexiteek International","description":"","publisher":{"@id":"https://www.flexiteek.com/nl-nl/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https://www.flexiteek.com/nl-nl/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"nl-NL"},{"@type":"Organization","@id":"https://www.flexiteek.com/nl-nl/#organization","name":"Flexiteek International AB","url":"https://www.flexiteek.com/nl-nl/","logo":{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https://www.flexiteek.com/nl-nl/#/schema/logo/image/","url":"https://www.flexiteek.com/nl-nl/wp-content/uploads/sites/2/2025/09/flexiteek-landscape-logo.svg","contentUrl":"https://www.flexiteek.com/nl-nl/wp-content/uploads/sites/2/2025/09/flexiteek-landscape-logo.svg","width":610,"height":133,"caption":"Flexiteek International AB"},"image":{"@id":"https://www.flexiteek.com/nl-nl/#/schema/logo/image/"},"sameAs":["https://www.facebook.com/Flexiteek","https://www.instagram.com/flexiteek/","https://www.linkedin.com/company/flexiteek-international-ab/","https://www.youtube.com/c/Flexiteek"]}]}},"_links":{"self":[{"href":"https://www.flexiteek.com/nl-nl/wp-json/wp/v2/pages/6920","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https://www.flexiteek.com/nl-nl/wp-json/wp/v2/pages"}],"about":[{"href":"https://www.flexiteek.com/nl-nl/wp-json/wp/v2/types/page"}],"author":[{"embeddable":true,"href":"https://www.flexiteek.com/nl-nl/wp-json/wp/v2/users/3"}],"replies":[{"embeddable":true,"href":"https://www.flexiteek.com/nl-nl/wp-json/wp/v2/comments?post=6920"}],"version-history":[{"count":1,"href":"https://www.flexiteek.com/nl-nl/wp-json/wp/v2/pages/6920/revisions"}],"predecessor-version":[{"id":6921,"href":"https://www.flexiteek.com/nl-nl/wp-json/wp/v2/pages/6920/revisions/6921"}],"wp:attachment":[{"href":"https://www.flexiteek.com/nl-nl/wp-json/wp/v2/media?parent=6920"}],"wp:term":[{"taxonomy":"audience_type","embeddable":true,"href":"https://www.flexiteek.com/nl-nl/wp-json/wp/v2/audience-types?post=6920"}],"curies":[{"name":"wp","href":"https://api.w.org/{rel}","templated":true}]}}