D.I.Y. WITH ISITEEK
ISITEEK is a do-it-yourself product primarily aimed at the marine market and has been developed by Flexiteek mainly for the making of smaller panels.
Weight = 5 kg per m² / Thickness = 4mm

Templates
The template is done on a 1:1 scale of the area where you want to install Isiteek. If multiple decks are to align, mark with a line across the templates.
Build
Cut lengths of Isiteek that are slightly longer than the template. Glue the Isiteek planks so that the built-up area has a small excess to the template. Put the template on the panel, mark and then cut the panel out.


Install
Apply and spread glue over the area and attach the panel. Use a roller and make sure that all excess glue and trapped air rolled out onto the tape. It takes 12-24 hours to cure the adhesive, depending on the temperature. The preferred operating temperature is + 20 °.